| المعلومات |
| صحيفة وقائع |
| معرض الصور |
| معرض الفيديو |
WS1 Plus
| TOOL HOLDER SHAFT DIAMETER | mm | 35 ( 1,38 in ) |
| BORING DIAMETER | mm | 22 - 180 ( 0,87 in – 7,09 in ) |
| WELDING DIAMETER | mm | 25 - 250 ( 0,98 in – 9,84 in ) |
| WELDING TECHNOLOGY | SPIRAL (CONTINUOUS WITH VARIABLE STEP) | |
| LONGITUDINAL STROKE | UNLIMITED WITH STEP OF 120mm (4,72 in) | |
| ROTATION MOTOR | C/C (CE COMPLIANT) | |
| FEED MOTOR | C/C (CE COMPLIANT) | |
| FEED SYSTEM | ELECTRIC-MECHANICAL | |
| OUTPUT TORQUE AT THE BAR | 120 Nm (266 Rpm) | |
| MAX ROTATION SPEED | RPM | 266 |
| FEED RATE | mm/rpm | 0-0,5 ( 0-0,02 "/rev ) |
| MAX FEED SPEED(w/rapid button) | mm/min | 390 |
| REMOVAL MATERIAL | cm³/min | 23 |
| DRIVE UNIT WEIGHT | Kg | 20 |
| TOOL HOLDER SHAFT LENGTH | mm | N° 3 connectable self-centring bars with conical coupling 1000 + 1000 + 540 |
| Number | Accessory | Description |
| #1 | DRIVE UNIT | |
| #1 | CONTROL PANEL | |
| #1 | CABLE FOR CONTROL PANEL | |
| #4 | BEARING CARRIERS | |
| #1 | CENTRING KIT | 2 rings - 6 bosses - 6 screws M10x100mm |
| #5 | CARBIDE INSERTS | |
| #2 | TOOL-HOLDER | S10Cx35mm + S10Cx50mm (complete with torx screw) |
| #2 | TOOL-HOLDER EXTENSIONS | ø 80mm + ø 130mm |
| #1 | SMALL HOOK | device for regulating cutting depth of tool holder |
| #1 | MICROSPAND | modular device used for internal measurements |
| #1 | COMPARATOR 1/100 | |
| #1 | COMPARATOR EXTENSION | |
| #2 | COMPARATOR HOLDERS | 8/8 - 10/8 |
| #1 | TELESCOPIC WELDING TORCH SHAFT | Ø 35mm - Length 1500mm |
| #3 | TORCH HEADS FOR INTERNAL OVERLAY WELDING C/W WELDING WIRE NOZZLE AND GAS DIFFUSER | B 125mm + M 70mm + N 60mm |
| #1 | TORCH HEAD FOR EXTERNAL OVERLAY WELDING C/W WELDING WIRE NOZZLE AND GAS DIFFUSER | A 320mm |
| #3 | TORCH HEAD EXTENSIONS | D 55mm + E 45mm + O 150mm |
| #1 | LATHED WELDING WIRE NOZZLE | ø 0,8mm |
| #2 | SHORT WELDING WIRE NOZZLES | ø 0,8mm - ø 1,0mm |
| #2 | LONG WELDING WIRE NOZZLES | ø 0,8mm - ø 1,0mm |
| # | WRENCHES | |
| #1 | OPERATION MANUAL | |
| #1 | TROLLEY | |
| #12 | EXTENSION BRACKETS FOR ADJUSTING DIAMETERS | 70mm |
| #1 | TORCH CABLE WITH EUR FITTING | |
| #3 | CONNECTABLE SELF-CENTRING TOOL-HOLDER SHAFTS WITH CONICAL COUPLING | Ø 35mm - Length 1000mm + 1000mm + 540mm |
| #1 | WRENCH FOR TORX SCREW |
| KIT 20 / WS1 Plus | For boring starting from Ø 22mm up to Ø 45mm |
| KIT 2000 / ø35mm | For facing bosses, creating circlip grooves, external machining from Ø 40mm up to Ø 250mm |
| DIAMETER Ø180mm | |||
| CUTTING DEPTH | mm | 3 in the radius 6 in the diameter | |
| FEED SPEED | mm/min | 4 | |
| DIAMETER Ø60mm | |||
| CUTTING DEPTH | mm | 5 in the radius 10 in the diameter | |
| FEED SPEED | mm/min | 8 | |
| News |
Sir Meccanica S.p.A. - Azienda e stabilimento di produzione : Viale Europa 37, 88100 Catanzaro - Italy
Tel.: +39 0961 769696 - 769734 - 769672 - WebSite: www.sirmeccanica.com - e-mail: sirmecc@sirmeccanica.com
© Copyright Sirmeccanica Company 2010
Tel.: +39 0961 769696 - 769734 - 769672 - WebSite: www.sirmeccanica.com - e-mail: sirmecc@sirmeccanica.com
© Copyright Sirmeccanica Company 2010
|
|
|