Being designed to guarantee the maximum reliability and ergonomics, the Fmax Controller combines practicality and design in one solution.
The control panel can be adapted according to the height and the inclination required by the operator granting the maximum comfort for maneuverability and legibility.

There are 4 controlling areas, one for each movement of the machine:
[S] – milling rotation.
[R] – machine rotation.
[X] – radial feed. 
[Z] – axial feed.
For each movement, it is possible to set the direction and speed independently;
All the speeds, both translation [mm/min] and rotation [rpm], are continuously monitored in an independent way.
The translations are manageable through the “Fast Feed Switch”, and for each one, there is a STATUS display for the diagnostics of the functioning status.
Each control area, is supplied with a ST.P led bar, thanks to which it is possible to verify the momentary working load.
When the ST.P led bar flashes, it warns the operator that the machine is overloaded, giving the possibility to modify the cutting parameters properly.
In the electronic divider/positioner version for circular series of holes, the controller is equipped with an additionalalphanumeric LCD display, having 3 more switches and a signal lighting tower that can be bent to function as a led. 
By indicating the number of holes according to the diameter on which they need to be equally distributed, this optional accessory, positions the machine on the exact coordinates on which each hole will have to be placed;
The alternate switching on of the 3 colors, along with the acoustic signals, continuously guides and updates the operators, who are far from the controller, on the working status in progress.