Portable machine tool for perfect realignment of housing for coaxial cylindrical hinges, placed in series on indefinite extensions. Specifically, using tapered shaft coupling occurs over a length of over 10 meters with a diameter of 100 mm locally. It's 'possible to make the realignment of the housing through boring, boring.
../repository_/img/world.gif
../repository_/img/anniversary.png
信息
照片库
视频画廊
概况介绍
WS2 Plus

With Standard Equipment
IN-LINE BORING
Starting from ø 52 mm to over ø 450 mm

OVERLAY WELDING
Internal– from ø 25 mm to over ø 450 mm
External- from ø 20 mm to over ø 450 mm
Drilling – from ø 5mm to max ø 45 mm 
Tapping – from ø 8mm to max ø 45 mm 
with presetting for Tapping 

WS 系列：在单一的简单设置中，这些机械能够在现场进行：

  • 镗孔
  • 内外表面堆焊
  • 钻孔
  • 开孔

将任意锥形或磨损的轴孔修旧如初。该系列的机械以它们的稳定性、准确性、精巧性、坚固性、安全性、智能应用和便于操作的特点而备受瞩目。WS 系列包括 8 个型号，各自有不同的工作范围。各型号机器为大小型设备的内孔和联轴器提供高精度的现场修理，无需拆卸设备，减少了停机时间和运输到维修店的时间。统计显示，这些创新机械降低了 85% 的维修时间。 

 

优势： 

  • 应用范围广泛
  • 无运输费用
  • 缩短工作时间
  • 减少劳力成本
  • 性能安全可靠

 

An electronic circuit has been inserted to guarantee a major safety in operation and to safeguard the rotation motor from excessive strain in case of an incorrect setup of the parameters, as well as to compensate possible critical points in machining. It automatically and proportionally reduces the feeding speed to reach the maximum strain point of the rotation motor, in order to dynamically reduce the load of the work, without passing the stop point for protection.
Thanks to the led bar called STP, it is possible to constantly monitor the motor's work load, so to be able to optimize the choice of the parameters (rotation speed and feed speed),  based on the hardness of the material, the type of tool being used, to the machining diameter and to routing diameter of the tool. Furthermore, the bar signals in advance the alarm condition and the subsequent shut down of the control panel, flashing until the working conditions are restored.

Product Data Sheets

The technical characteristics include:
AC 110  ~ 220  50 / 60 HZ WITH AUTOSELECTION OF MAINS VOLTAGE, WITHOUT THE USE OF TRANSFORMERS OR INVERTERS; ELIMINATING ELECTROMAGNETIC INTERFERENCES 
ESPS ® TORQUE ELECTRONIC RUNNING OF THE TWO MOTORS WITH ELECTROMECHANIC SYNCHRONIZATION 
DISPLAY FOR SPEED OF ROTATION REVOLUTIONS
ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE RUNNING OF THE ROTATION  MOTOR
DISPLAY FOR SPEED OF FEEDING REVOLUTIONS
ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE RUNNING OF THE FEEDING  MOTOR
MAIN SWITCH
EMERGENCY SWITCH
INVERTER DX/SX FOR FEEDING
INVERTER DX/SX FOR ROTATION
POTENTIOMETER FOR ROTATIONREGULATIO
POTENTIOMETER FOR FEEDING REGULATION
SWITCH FOR RAPID TRANSLATION OF THE SHAFT

The W series is characterized by: A rotation drive system

“ Worm gear-helical wheel”, with permanent lubrication, patented and state-of-the-art. To obtain an elevated productivity, high performance and low noise, the mechanisms are made with 16CrNi4 steel, cemented, tempered and refaced. Particular attention has been given to the realization of the profile, to obtain a better contact among the surfaces. The wheels have a cast iron G20 hub on which an antifriction bronze fusion G-CuSn12 is applied, to optimise performances and efficiency. Housing and flanges are made of engineering cast iron G20 UNI 5007. The commercial components used, such as tapered-roller bearings or radial ball bearings, oil seals, gaskets, lubricants are accurately selected so to guarantee high quality.

Motors
The power has reached elevated standards, the ideal thing for any applicative situation which requests motion linearity, overload capacity and load control with high inertia. Magnetized and tested one by one, they guarantee reliability and efficiency. They are characterized by:

  • Permanent magnets made of calibrated ferrite, with a high coercive force.
  • Multi-bladed collector to obtain a perfect commutation.
  • 4-poles tachometric dynamo with rare earths magnets built into the motor
  • IP54 protection level
  • Skewed armature for smooth running at low speeds
News
产品
WS
TOP
FMAX
RSX9
WTMAX

Sir Meccanica S.p.A. - Azienda e stabilimento di produzione : Viale Europa 37, 88100 Catanzaro - Italy
Tel.: +39 0961 769696 - 769734 - 769672 - WebSite: www.sirmeccanica.com - e-mail: sirmecc@sirmeccanica.com

© Copyright Sirmeccanica Company 2010



Valid XHTML 1.0 Transitional     CSS Valido!    
 

Request Form

Exclusive Commercial Proposal for this Country
Offer for
Sir Meccanica
Title
Name
Last Name
Company
Address
Zip Code
City
Country
Tel
E-mail
Sector
Web Site
N. of Employees
Notes
I want to receive a commercial proposal
I want to be contacted by phone
Enter Word Verification in box below:
Captcha Code
 

Request Form

Dealer Request
Title
Name
Last Name
Company
Address
Zip Code
City
Country
Tel
E-mail
Sector
Web Site
N. of Employees
Notes
I want to be contacted by phone
Enter Word Verification in box below:
Captcha Code