Portable machine tools for in line boring, making plans for turning the orthogonal cylindrical external surfaces and creating housing Seeger. Reconditioning and realignment wheel loader arm. With the new kit it is possible to process 2000 for creating the site Seeger. It is used for repair of presses, repair of buckets, bore welding and barycentric internal and external.
WS2 Standard

With Standard Equipment
IN-LINE BORING
Starting from ø 42mm to over ø 400mm

OVERLAY WELDING
Internal– from ø 25mm to over ø 400mm
External- from ø 20mm to over ø 250mm
Drilling – from ø 5mm to max ø 15mm
Tapping – from ø 8mm to max ø 45mm 
with presetting for Tapping 

WS Series: In a single, simple set-up, these machines perform on-site:

  • BORING
  • OVERLAY WELDING ON INSIDE AND OUTSIDE SURFACES
  • DRILLING
  • TAPPING

to restore any tapered or worn out bore to its original size. The machines in this series stand out for their stability, accuracy, compact size, sturdiness, safety, smart application and smooth operation. The WS series includes 8 models, each with a different work range. Individual machines provide high accuracy for on-site repair of bores and joints of large and small equipment, eliminating the need to disassemble the equipment, reducing down time and avoiding transport to a repair shop. Statistics show that these innovative machines reduce repair time by 85%..

BENEFITS:

  • Broad range of applications
  • No transport costs
  • Shorter machining time
  • Less labour costs
  • Safe, reliable performance

An electronic circuit has been inserted to guarantee a major safety in operation and to safeguard the rotation motor from excessive strain in case of an incorrect setup of the parameters, as well as to compensate possible critical points in machining. It automatically and proportionally reduces the feeding speed to reach the maximum strain point of the rotation motor, in order to dynamically reduce the load of the work, without passing the stop point for protection.
Thanks to the led bar called STP, it is possible to constantly monitor the motor's work load, so to be able to optimize the choice of the parameters (rotation speed and feed speed),  based on the hardness of the material, the type of tool being used, to the machining diameter and to routing diameter of the tool. Furthermore, the bar signals in advance the alarm condition and the subsequent shut down of the control panel, flashing until the working conditions are restored.

Product Data Sheets

The technical characteristics include:
AC 110  ~ 220  50 / 60 HZ WITH AUTOSELECTION OF MAINS VOLTAGE, WITHOUT THE USE OF TRANSFORMERS OR INVERTERS; ELIMINATING ELECTROMAGNETIC INTERFERENCES 
ESPS ® TORQUE ELECTRONIC RUNNING OF THE TWO MOTORS WITH ELECTROMECHANIC SYNCHRONIZATION 
DISPLAY FOR SPEED OF ROTATION REVOLUTIONS
ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE RUNNING OF THE ROTATION  MOTOR
DISPLAY FOR SPEED OF FEEDING REVOLUTIONS
ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE RUNNING OF THE FEEDING  MOTOR
MAIN SWITCH
EMERGENCY SWITCH
INVERTER DX/SX FOR FEEDING
INVERTER DX/SX FOR ROTATION
POTENTIOMETER FOR ROTATIONREGULATIO
POTENTIOMETER FOR FEEDING REGULATION
SWITCH FOR RAPID TRANSLATION OF THE SHAFT

The W series is characterized by: A rotation drive system

“ Worm gear-helical wheel”, with permanent lubrication, patented and state-of-the-art. To obtain an elevated productivity, high performance and low noise, the mechanisms are made with 16CrNi4 steel, cemented, tempered and refaced. Particular attention has been given to the realization of the profile, to obtain a better contact among the surfaces. The wheels have a cast iron G20 hub on which an antifriction bronze fusion G-CuSn12 is applied, to optimise performances and efficiency. Housing and flanges are made of engineering cast iron G20 UNI 5007. The commercial components used, such as tapered-roller bearings or radial ball bearings, oil seals, gaskets, lubricants are accurately selected so to guarantee high quality.

Motors
The power has reached elevated standards, the ideal thing for any applicative situation which requests motion linearity, overload capacity and load control with high inertia. Magnetized and tested one by one, they guarantee reliability and efficiency. They are characterized by:

  • Permanent magnets made of calibrated ferrite, with a high coercive force.
  • Multi-bladed collector to obtain a perfect commutation.
  • 4-poles tachometric dynamo with rare earths magnets built into the motor
  • IP54 protection level
  • Skewed armature for smooth running at low speeds
Sir Meccanica S.p.A. - Azienda e stabilimento di produzione : Viale Europa 37, 88100 Catanzaro - Italy
Tel.: +39 0961 769696 - 769734 - 769672 - WebSite: www.sirmeccanica.com - e-mail: sirmecc@sirmeccanica.com

© Copyright Sirmeccanica Company 2010




Valid XHTML 1.0 Transitional     CSS Valido!    

Request Form

Exclusive Commercial Proposal for this Country

Offer for
Sir Meccanica
Title
Name
Last Name
Company
Address
Zip Code
City
Country
Tel
E-mail
Sector
Web Site
N. of Employees
Notes
I want to receive a commercial proposal
I want to be contacted by phone
Enter Word Verification in box below:
Captcha Code

Request Form

Dealer Request

Title
Name
Last Name
Company
Address
Zip Code
City
Country
Tel
E-mail
Sector
Web Site
N. of Employees
Notes
I want to be contacted by phone
Enter Word Verification in box below:
Captcha Code