| Quantity |
Description |
Technical Specification |
| #1 |
DRIVE UNIT |
|
| #1 |
CONTROL PANEL |
|
| #1 |
CABLE FOR CONTROL PANEL |
|
| #1 |
CONTROL PANEL HOLDER |
|
| #4 |
BEARING CARRIERS |
|
| #34 |
BRACKETS FOR ADJUSTING DIAMETERS |
(N° 12 X mm 200, N° 12 X mm 300, N° 10 X mm 700 double special brackets) |
| #1 |
CENTRING KIT |
(2 EXT.RINGS – 2 INT.RINGS - 6 BOSSES Lgth. 100 mm) |
| #18 |
THREADED BARS |
FOR CENTERING KIT (6 – M30x200 mm; 6 – M30x400 mm; 6 – M30x600 mm) |
| #24 |
THREADED BARS |
M14 (TENSION BAR) FOR TOOL HOLDER (4 X100mm + 4 x 150 mm + 4x 200mm + 4 x 250 mm + 4 x 300 mm + 4 x |
| #20 |
CARBIDE INSERTS |
|
| #1 |
TOOL-HOLDER |
SHAFT ø 100 mm Lgth. 3000mm |
| #1 |
TOOL-HOLDER |
S10Cx30 mm (COMPLETE WITH WRENCH AND TORX SCREW) |
| #1 |
TOOL-HOLDER |
S10Cx50 mm (COMPLETE WITH WRENCH AND TORX SCREW) |
| #1 |
TOOL-HOLDER |
S12Cx80 mm (COMPLETE WITH WRENCH AND TORX SCREW) |
| #2 |
TOOL-HOLDER |
KEYS 8X8X110 |
| #1 |
MICROSPAND |
(MODULAR DEVICE USED FOR INTERNAL MEASUREMENTS) |
| #1 |
MICROSPAND EXTENSIONS |
100 mm |
| #1 |
COMPARATOR 1/100 |
|
| #1 |
COMPARATOR EXTENSION |
|
| #2 |
COMPARATOR HOLDERS |
8/8 – 10/8 |
| #1 |
WELDING TORCH CABLE WITH EUR-FITTING |
|
| #3 |
TORCH HEADS FOR INTERNAL OVERLAY WELDING C/W WELDING WIRE NOZZLE AND GAS DIFFUSER |
WELDING WIRE NOZZLES AND GAS DIFFUSER (B 125 mm + G 180 mm + I 250 mm) |
| #4 |
TORCH HEAD EXTENSIONS |
(D 55 mm + E 45 mm + H 135 mm + L 160 mm) |
| #2 |
SHORT WELDING WIRE NOZZLES |
ø 1 mm |
| #6 |
LONG WELDING WIRE NOZZLES |
N° 2 – ø 0,8 mm; N° 2 – ø 1 mm; N°2 – ø 1,2 mm |
| #1 |
WRENCHES |
|
| #1 |
OPERATION MANUAL |
|
| #1 |
TROLLEY |
|
| #2 |
ADAPTING BUSHINGS FOR TORCH SHAFT |
lgth. 240 – lgth. 130 |
| #1 |
TORCH SHAFT |
ø 40 mm Lgth. Tot. 2000 mm |
| #1 |
CHROMED BARS FOR TOOL HOLDER EXTENSION |
ø 40 LGTH 50 MM FOR TOOL HOLDER EXTENSION |
| #1 |
CHROMED BARS FOR TOOL HOLDER EXTENSION |
ø 40 LGTH 100 MM FOR TOOL HOLDER EXTENSION |
| #1 |
CHROMED BARS FOR TOOL HOLDER EXTENSION |
ø 40 LGTH 150 MM FOR TOOL HOLDER EXTENSION |
| #2 |
STAR SHAPED BRACKETS |
ø 700 mm |
| #20 |
WASHERS FOR STAR SHAPED BRACKETS FIXING |
|
| #10 |
STUD FOR BRACKET |
|
| #10 |
STUD SPACERS |
|
| #10 |
STUD NUTS |
|
| #20 |
WASHERS 18 |
(COMPLETE BOLTING) |
| #1 |
DISK SHAPED MAIN TOOL HOLDER COMPOSED OF 2 HALF DISKS |
ø 340 MM COMPOSED OF 2 HALF DISKS |
| #1 |
TOWER SHAPED TOOL HOLDER EXTENSION |
100 MM FOR MAIN TOOL HOLDER |
| #1 |
SUPPLEMENT FOR TOOL HOLDER EXTENSION |
50 MM FOR TOOL HOLDER EXTENSION |
| #2 |
SUPPLEMENT FOR TOOL HOLDER EXTENSION |
100 MM FOR TOOL HOLDER EXTENSION |
